FireFly Media Server › Firefly Media Server Forums › Firefly Media Server › Setup Issues › So now I have gone and made soup of it all…
- This topic has 22 replies, 6 voices, and was last updated 17 years, 4 months ago by richdunlop.
-
AuthorPosts
-
28/06/2007 at 4:29 PM #1512davesantiParticipant
12 hours ago FF was up and running perfectly on my newly unlsung Slug…and HDD NAS setup. But I couldn’t leave well enough alone.. and unfortunately my Linux/skills and understanding are nonexistent.
Install was HDD only on port 2.. I wanted to a flash/HDD with Slug unlunsg to flash on port 2.. I made a huge mess of it and the Slug went to hell on me. I seem to have more or less recovered after a bunch or hair pulling and now it seems I am unslung to the flash on drive 2 and the HDD is recognized in drive 1. Both drives are mapped to my PC and come up and I can put file in them.. Here is a shot of my Slug GUI page.
I tried to install FF (nightly) and regular with no success (as an aside, I tried Twonky and got it installed no problem and it is working, but I don’t want Twonky I love FF).
When I do # ipkg install mt-daapd I get a bunch of errors:
Here is what it looked like with a nightly attempt:
First off this what I get when I telnet in:
LKG7BFC4D login: root
Password:
No directory, logging in with HOME=/Welcome to Unslung V2.3R63-uNSLUng-6.8-beta
NOTE: THIS SYSTEM IS CURRENTLY UNSLUNG
BusyBox v0.60.4 (2005.03.22-06:52+0000) Built-in shell (ash)
Enter ‘help’ for a list of built-in commands.I notice the no directory thing, in the first few lines and don’t think I have ever seen that before..
Then:
# echo “src firefly http://ipkg.fireflymediaserver.org/armeb” > /etc/ipkg/firefl
y.conf
# ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/Package
s.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/Packages.
gz
Updated list of available packages in /usr/lib/ipkg/lists/cross
Downloading http://ipkg.fireflymediaserver.org/armeb/Packages
Updated list of available packages in /usr/lib/ipkg/lists/firefly
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/stable/Packag
es.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/stable/Packages
.gz
Updated list of available packages in /usr/lib/ipkg/lists/native
Downloading http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/6.8-beta/Pac
kages.gz
Inflating http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/6.8-beta/Packa
ges.gz
Updated list of available packages in /usr/lib/ipkg/lists/oeSo far so good, I think, but:
I try
# ipkg install mt-daapd
And get
Installing mt-daapd (svn-1586-1) to root…
Downloading http://ipkg.fireflymediaserver.org/armeb/mt-daapd_svn-1586-1_armeb.i
pk
Installing libid3tag (0.15.1b-1) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libid3t
ag_0.15.1b-1_armeb.ipk
Installing zlib (1.2.3-2) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/zlib_1.
2.3-2_armeb.ipk
Installing libogg (1.1.3-3) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libogg_
1.1.3-3_armeb.ipk
Installing libvorbis (1.1.2-5) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libvorb
is_1.1.2-5_armeb.ipkAfter a bit more then I start getting a ton of these:
ipkg: /opt/share/terminfo/n/ncr260intpp: No such file or directory
ipkg: /opt/share/terminfo/n/nsterm-m-s: No such file or directory
ipkg: Cannot create symlink from ./opt/share/terminfo/n/nwe501 to ‘../n/nwp513’:
No such file or directory
ipkg: /opt/share/terminfo/n/ncr260wy60wpp: No such file or directory
ipkg: Cannot create symlink from ./opt/share/terminfo/n/nsterm-7-m to ‘../n/nste
rm-m-7′: No such file or directory
ipkg: /opt/share/terminfo/n/nsterm-s-7: No such file or directory
ipkg: /opt/share/terminfo/n/nsterm-acs: No such file or directoryAnd it concludes with :
Collected errors:
Unable to open the control file in set_flags_from_control
Could not open //usr/lib/ipkg/info/ivorbis-tools.list for writing: Input/output
error
Could not open //usr/lib/ipkg/info/libao.list for writing: Input/output error
Could not open //usr/lib/ipkg/info/libcurl.list for writing: Input/output error
Could not open //usr/lib/ipkg/info/libogg.list for writing: Input/output error
Could not open //usr/lib/ipkg/info/libvorbis.list for writing: Input/output erro
r
Could not open //usr/lib/ipkg/info/zlib.list for writing: Input/output error
WARNING: Unable to remove temporary directory: /tmp/ipkg-tUF42M: No such file or
directory
#Have I made a mess or is this something that can be cleaned up.
Ouch.. I am such an idiot some times… I need to stick to doing nothing but following directions.
Dave
28/06/2007 at 7:27 PM #11429rpeddeParticipant@davesanti wrote:
12 hours ago FF was up and running perfectly on my newly unlsung Slug…and HDD NAS setup. But I couldn’t leave well enough alone.. and unfortunately my Linux/skills and understanding are nonexistent.
Install was HDD only on port 2.. I wanted to a flash/HDD with Slug unlunsg to flash on port 2.. I made a huge mess of it and the Slug went to hell on me. I seem to have more or less recovered after a bunch or hair pulling and now it seems I am unslung to the flash on drive 2 and the HDD is recognized in drive 1. Both drives are mapped to my PC and come up and I can put file in them.. Here is a shot of my Slug GUI page.
I tried to install FF (nightly) and regular with no success (as an aside, I tried Twonky and got it installed no problem and it is working, but I don’t want Twonky I love FF).
When I do # ipkg install mt-daapd I get a bunch of errors:
Here is what it looked like with a nightly attempt:
First off this what I get when I telnet in:
LKG7BFC4D login: root
Password:
No directory, logging in with HOME=/Welcome to Unslung V2.3R63-uNSLUng-6.8-beta
NOTE: THIS SYSTEM IS CURRENTLY UNSLUNG
BusyBox v0.60.4 (2005.03.22-06:52+0000) Built-in shell (ash)
Enter ‘help’ for a list of built-in commands.I notice the no directory thing, in the first few lines and don’t think I have ever seen that before..
Then:
# echo “src firefly http://ipkg.fireflymediaserver.org/armeb” > /etc/ipkg/firefl
y.conf
# ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/Package
s.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/Packages.
gz
Updated list of available packages in /usr/lib/ipkg/lists/cross
Downloading http://ipkg.fireflymediaserver.org/armeb/Packages
Updated list of available packages in /usr/lib/ipkg/lists/firefly
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/stable/Packag
es.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/stable/Packages
.gz
Updated list of available packages in /usr/lib/ipkg/lists/native
Downloading http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/6.8-beta/Pac
kages.gz
Inflating http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/6.8-beta/Packa
ges.gz
Updated list of available packages in /usr/lib/ipkg/lists/oeSo far so good, I think, but:
I try
# ipkg install mt-daapd
And get
Installing mt-daapd (svn-1586-1) to root…
Downloading http://ipkg.fireflymediaserver.org/armeb/mt-daapd_svn-1586-1_armeb.i
pk
Installing libid3tag (0.15.1b-1) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libid3t
ag_0.15.1b-1_armeb.ipk
Installing zlib (1.2.3-2) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/zlib_1.
2.3-2_armeb.ipk
Installing libogg (1.1.3-3) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libogg_
1.1.3-3_armeb.ipk
Installing libvorbis (1.1.2-5) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libvorb
is_1.1.2-5_armeb.ipkAfter a bit more then I start getting a ton of these:
ipkg: /opt/share/terminfo/n/ncr260intpp: No such file or directory
ipkg: /opt/share/terminfo/n/nsterm-m-s: No such file or directory
ipkg: Cannot create symlink from ./opt/share/terminfo/n/nwe501 to ‘../n/nwp513’:
No such file or directory
ipkg: /opt/share/terminfo/n/ncr260wy60wpp: No such file or directory
ipkg: Cannot create symlink from ./opt/share/terminfo/n/nsterm-7-m to ‘../n/nste
rm-m-7′: No such file or directory
ipkg: /opt/share/terminfo/n/nsterm-s-7: No such file or directory
ipkg: /opt/share/terminfo/n/nsterm-acs: No such file or directoryAnd it concludes with :
Collected errors:
Unable to open the control file in set_flags_from_control
Could not open //usr/lib/ipkg/info/ivorbis-tools.list for writing: Input/output
error
Could not open //usr/lib/ipkg/info/libao.list for writing: Input/output error
Could not open //usr/lib/ipkg/info/libcurl.list for writing: Input/output error
Could not open //usr/lib/ipkg/info/libogg.list for writing: Input/output error
Could not open //usr/lib/ipkg/info/libvorbis.list for writing: Input/output erro
r
Could not open //usr/lib/ipkg/info/zlib.list for writing: Input/output error
WARNING: Unable to remove temporary directory: /tmp/ipkg-tUF42M: No such file or
directory
#Have I made a mess or is this something that can be cleaned up.
Ouch.. I am such an idiot some times… I need to stick to doing nothing but following directions.
Dave
Sounds like your opt directory is in the wrong place and it thinks you have packages installed that you don’t. Or something.
If that’s the case, you can move the /opt directory out of the way (/opt.old?) and symlink opt to the /opt directory on the hard drive.
That might work.
Or, look at “Upgrade challenge #2” on this page:
http://www.nslu2-linux.org/wiki/Unslung/UpgradingToUnslung6
That may be what’s tripping you up, too — it’s trying to boot off your old drive.
See if the instructions there help.
— Ron
28/06/2007 at 7:44 PM #11430davesantiParticipantThanks, Ron.
I have no objection to a “clean start” either… I will do it all over again if is solves my issues. Does that seem like a good approach, also.
I am not certain I wont make a mess out of moving the directory. Also, I want the Flash drive to have all the operating stuff on it. Would putting the /opt directory on the hard drive be consistent with this idea.
All of this is a result of my desrire to get the HDD to spin down. It appears that to do this I should be unslung to the flash so the Slug doesnt have to access the HDD when not in use. BTW, the HDD spins down fine when on, but no attached to the Slug.
Dave
28/06/2007 at 9:11 PM #11431davesantiParticipantRob, I performed a clean install and have reflashed/reslung to the 2gb stick on port 2.
All of that looks great..
But, still no go
Here is what I got:
LKG7BFC4D login: root
Password:
No directory, logging in with HOME=/Welcome to Unslung V2.3R63-uNSLUng-6.8-beta
NOTE: THIS SYSTEM IS CURRENTLY UNSLUNG
BusyBox v0.60.4 (2005.03.22-06:52+0000) Built-in shell (ash)
Enter ‘help’ for a list of built-in commands.# echo “src firefly http://ipkg.fireflymediaserver.org/armeb” > /etc/ipkg/firefl
y.conf
# ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/Package
s.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/Packages.
gz
Updated list of available packages in /usr/lib/ipkg/lists/cross
Downloading http://ipkg.fireflymediaserver.org/armeb/Packages
Updated list of available packages in /usr/lib/ipkg/lists/firefly
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/stable/Packag
es.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/stable/Packages
.gz
Updated list of available packages in /usr/lib/ipkg/lists/native
Downloading http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/6.8-beta/Pac
kages.gz
Inflating http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/6.8-beta/Packa
ges.gz
Updated list of available packages in /usr/lib/ipkg/lists/oe
# ipkg install mt-daapd
Installing mt-daapd (svn-1586-1) to root…
Downloading http://ipkg.fireflymediaserver.org/armeb/mt-daapd_svn-1586-1_armeb.i
pk
Installing libid3tag (0.15.1b-1) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libid3t
ag_0.15.1b-1_armeb.ipk
Installing zlib (1.2.3-2) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/zlib_1.
2.3-2_armeb.ipk
Installing libogg (1.1.3-3) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libogg_
1.1.3-3_armeb.ipk
Installing libvorbis (1.1.2-5) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libvorb
is_1.1.2-5_armeb.ipk
Installing ivorbis-tools (1.0-6) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/ivorbis
-tools_1.0-6_armeb.ipk
ipkg: extract_archive: /opt/man/: Input/output error
ipkg: extract_archive: /opt/man/man1/: No such file or directory
ipkg: /opt/man/man1/vcut.1: No such file or directory
ipkg: /opt/man/man1/ogg123.1: No such file or directory
ipkg: /opt/man/man1/oggdec.1: No such file or directory
ipkg: /opt/man/man1/ogginfo.1: No such file or directory
ipkg: /opt/man/man1/vorbiscomment.1: No such file or directory
ipkg: /opt/man/man1/oggenc.1: No such file or directory
ipkg: extract_archive: /opt/bin/: Input/output error
ipkg: /opt/bin/vcut: No such file or directory
ipkg: /opt/bin/vorbiscomment: No such file or directory
ipkg: /opt/bin/ogg123: No such file or directory
ipkg: /opt/bin/oggenc: No such file or directory
ipkg: /opt/bin/oggdec: No such file or directory
ipkg: /opt/bin/ogginfo: No such file or directory
ipkg: extract_archive: /opt/share/doc/vorbis-tools-1.0/: Input/output error
ipkg: /opt/share/doc/vorbis-tools-1.0/ogg123rc-example: No such file or director
y
Installing libao (0.8.6-2) to root…
Downloading http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable/libao_0
.8.6-2_armeb.ipk
pkg_run_script: ERROR: uninstalled package libao has a NULL tmp_unpack_dir
Configuring ivorbis-tools
Configuring libid3tag
Configuring libogg
Configuring libvorbis
Configuring update-modules
Configuring zlib
An error ocurred, return value: 1.
Collected errors:
unpack_pkg_control_files: Failed to create temporary directory ‘(null)’: Input/o
utput error
Aborting installation of libao
#If i try to run the install or download scripts I get:
# ipkg update
ipkg_conf_init: Failed to create temporary directory `(null)’: Read-only file sy
stem
# ipkg install mt-daapd
ipkg_conf_init: Failed to create temporary directory `(null)’: Read-only file sy
stem
#(as an aside twonky wont install anymore either – “cant open NAS installer, read only file system”
Crap.. I thought I had it when the reflash and sling went well. Before I slung to the mem stick, I formatted it to Fat, and then reformatted it by the Slug (everything Ok, EXt2 and mounted).
Any more thoughts. I apologize for being such a Noob..
Dave
28/06/2007 at 11:40 PM #11432S80_UKParticipant@davesanti wrote:
Rob, I performed a clean install and have reflashed/reslung to the 2gb stick on port 2.
Hi,
Just wondering why you have the stick in port 2? From what I have read, port 1 seems to be the preferred port when unslinging to stick. I have done this a couple of times (following Rich Dunlop’s write up) and found no major problems.
One thing I noticed in your other thread(s) on the Roku forum – I think you reformatted the stick between attempts. This is good, but you may need to do more than that. The unslinging creates 3 partitions on the stick, and I found it best to remove all partitions on the stick using the Windows Disk Manager and create a single formatted partion before letting the slug see it, just in case it saw something left over from the previous attempts.
28/06/2007 at 11:48 PM #11433davesantiParticipantThank you, S80, I am planning on using the disk manager this time as I think you are right about the partitions.
As to the ports, I debated that. It seems that conventional wisdom (from the read me on the unsling 6.8 beta.. advised by Rich Dunlop to be followed) is Port 2 for single drive formatted by slug and all other drives will be Fat/NTFS
Port 2 for single drive formatted by slug only
Port 1 if you have 2 drives and both to be formatted by Slug.
My goal is to have mem stick on port 2 and HDD as Fat/NTFS on port 1.
I want the system to be able to ignore the HDD when I am not using it so it will spin down. Perhaps though it will do this anyway if I unsling to mem stick on port 1 and put HDD on port 2 after.
Dave
29/06/2007 at 12:26 AM #11434rpeddeParticipant@S80_UK wrote:
@davesanti wrote:
Rob, I performed a clean install and have reflashed/reslung to the 2gb stick on port 2.
Hi,
Just wondering why you have the stick in port 2? From what I have read, port 1 seems to be the preferred port when unslinging to stick. I have done this a couple of times (following Rich Dunlop’s write up) and found no major problems.
One thing I noticed in your other thread(s) on the Roku forum – I think you reformatted the stick between attempts. This is good, but you may need to do more than that. The unslinging creates 3 partitions on the stick, and I found it best to remove all partitions on the stick using the Windows Disk Manager and create a single formatted partion before letting the slug see it, just in case it saw something left over from the previous attempts.
I’ve got an install as well using Rich’s guide (http://wiki.fireflymediaserver.org/NSLU2_Installation) with stick on 1 and drive on 2.
29/06/2007 at 6:12 AM #11435davesantiParticipantEpilogue:
Well, things went from bad to worse and I finally gave up on that Slug…
Out of sheer mania to get things right, (and maybe lack of sleep) I went down to the local Comp Usa, dropped a C Note on another slug and tried again… very carefully…
Would you believe…..
Less then one hour start to finish.. running like a charm.
I unslung to port 1 (memory stick) and then when everything looked good I formatted the HDD on port 2.
FF latest nightly running great.. transferring a bunch of music to the HDD.
Thank you all for your help…You actually gave me a lot of good tips and advice.
If anyone wants a new de-underclocked Slug…which has problems, but may not yet be a total brick, I am willing to give it up for a very reasonable price 😀
Dave
29/06/2007 at 8:03 AM #11436fizzeParticipantHehe Dave, info about your whereabouts would come in handy for the interested. 😉
29/06/2007 at 8:35 AM #11437S80_UKParticipant@davesanti wrote:
Less then one hour start to finish.. running like a charm.
Well done!
Less than one hour…? That makes you an expert! It still takes me longer than that.
Glad you got there in the end.
I am sure the other slug is probably OK – just needs reflashing, etc. Where are you based?
-
AuthorPosts
- The forum ‘Setup Issues’ is closed to new topics and replies.