FireFly Media Server › Firefly Media Server Forums › Firefly Media Server › Setup Issues › Installation of FireFly on MSS
- This topic has 67 replies, 10 voices, and was last updated 16 years, 5 months ago by rpedde.
-
AuthorPosts
-
14/10/2007 at 5:39 PM #11321rpeddeParticipant
@rajt wrote:
Actually I’ve made a bit of a boo boo.
I tried to install the 1586 version, but it would not let me.
But now the config files seemed to have dissappeared?
These files have disappeared:
/opt/etc/mt-daapd/mt-daapd.conf
and
/shares/mss-hdd/__opt/etc/mt-daapd/mt-daapd.conf
How do I force a re-install of these files?
Thanks
just ipkg install mt-daapd.
That should pull the most recent version. I don’t think there are any remaining issues on the latest nightly with the mss.
— Ron
14/10/2007 at 5:57 PM #11322rajtParticipantSorry for all this…but I’ve sorted it all out!
Pls delete my last couple of posts…
01/11/2007 at 10:49 PM #11323siege_kingParticipantThere’s another post already but I want to ask if you all have the same problem with crappy transcoding of ogg on the mss.
02/11/2007 at 5:49 AM #11324rpeddeParticipant@siege_king wrote:
There’s another post already but I want to ask if you all have the same problem with crappy transcoding of ogg on the mss.
That’s a “non-integer-decoder” issue probably. If you are getting rebuffering all the time.
05/11/2007 at 1:31 PM #11325siege_kingParticipantIs there any other decoder available for the mss?
06/11/2007 at 5:11 AM #11326rpeddeParticipant@siege_king wrote:
Is there any other decoder available for the mss?
Should be able to “ipkg install ivorbis-tools”. that should get you the integer decoder. It conflicts with “vorbis-tools” though, if you already have that loaded, so you’ll have to ipkg remove it first.
— Ron
06/11/2007 at 10:23 PM #11327siege_kingParticipantI have already ivorbis-tools installed and it is producing crap. Should I then remove it and use the vorbis-tools?
Thanks for the help so far!
07/11/2007 at 4:11 AM #11328rpeddeParticipant@siege_king wrote:
I have already ivorbis-tools installed and it is producing crap. Should I then remove it and use the vorbis-tools?
Thanks for the help so far!
By crap, you mean noise? If so, you might have an old version of ivorbis-tools with the wrong endianness.
You can try ipkg update; ipkg install ivorbis-tools.
If that’s not a winner, then you can certainly try vorbistools, but I’d guess your machine is too underpowered to successfully transcode if it’s an embedded nas device. I’d guess you’d get rebuffering problems, but you could certainly try. No harm in that.
— Ron
-
AuthorPosts
- The forum ‘Setup Issues’ is closed to new topics and replies.