Can’t play oggs — Firefly on NSLU2

I am running Firefy on a NSLU2 running Debian, using the Debian package installed through apt-get. I have also installed ffmpeg. My library is showing up fully on itunes running on another computer, and I am able to stream .mp3 files, but when I try to stream an ogg file, a box opens in itunes saying “Loading” and everything just seems to freeze. I’d appreciate any help. I googled the problem but couldn’t find a solution. Here’s what the log file says when I do this:

2007-07-22 10:48:13 (00018005): Session 0: Streaming file '11 - Surfer Girl.ogg' to 192.168.2.199 (offset 0)

2007-07-22 10:48:13 (00018005): Transcoding /home/media/music/Beach Boys/Good Vibrations - 30 Years Of The Beach Boys (Disc 1)/11 - Surfer Girl.ogg with ssc-ffmpeg/svn-1376

2007-07-22 10:48:13 (00018005): opening /home/media/music/Beach Boys/Good Vibrations - 30 Years Of The Beach Boys (Disc 1)/11 - Surfer Girl.ogg

2007-07-22 10:48:13 (00018005): opening file with format

2007-07-22 10:48:14 (00018005): Updating Content-Type from application/x-dmap-tagged to audio/wav

2007-07-22 10:48:14 (00018005): Added *Connection=Close*

2007-07-22 10:48:14 (00018005): Emitting reponse header Connection: Close

2007-07-22 10:48:14 (00018005): Emitting reponse header Expires: -1

2007-07-22 10:48:14 (00018005): Emitting reponse header Cache-Control: no-cache

2007-07-22 10:48:14 (00018005): Emitting reponse header Content-Type: audio/wav

2007-07-22 10:48:14 (00018005): Emitting reponse header DAAP-Server: mt-daapd/svn-1376

2007-07-22 10:48:14 (00018005): Emitting reponse header Accept-Ranges: bytes

2007-07-22 10:48:14 (00018005): Emitting reponse header Date: Sun, 22 Jul 2007 17:48:13 GMT

2007-07-22 10:48:14 (00018005): Channels.......: 2

2007-07-22 10:48:14 (00018005): Sample rate....: 44100

2007-07-22 10:48:14 (00018005): Bits/Sample....: 16

2007-07-22 10:48:14 (00018005): Swab...........: 0

Here’s a copy of my mt-daapd.conf file (sorry for the long text…)

# $Id: mt-daapd.conf.templ 1238 2006-06-18 04:54:13Z rpedde $

#

# This is the mt-daapd config file.

#

# If you have problems or questions with the format of this file,

# direct your questions to [email protected].

#

# You can also check the website at http://mt-daapd.sourceforge.net,

# as there is a growing documentation library there, peer-supported

# forums and possibly more.

#



[general]



#

# web_root (required)

#

# Location of the admin web pages.

#

# If you installed from .RPM, .deb, or tarball with --prefix=/usr, then

# this is correct.

#

# If you installed from tarball without --prefix=/usr, then the correct

# path is probably /usr/local/share/mt-daapd/admin-root.

#



web_root = /usr/share/mt-daapd/admin-root



#

# port (required)

#

# What port to listen on.  It is possible to use a different

# port, but this is the default iTunes port

#



port = 3689



#

# admin_pw (required)

#

# This is the password to the administrative pages

#



admin_pw = wrench





#

# db_type (required)

#

# This is what kind of backend database to store the song

# info in.  Valid choices are "sqlite" and "sqlite3".

#



db_type = sqlite3



#

# db_parms

#

# This is any extra information the db needs to connect.

# in the case of sqlite and sqlite3, this is the name

# of the directory to store the database in

#

# If you installed from RPM or .deb, this path likely already

# exists.  If not, then you must create it.  The directory itself

# must be writable by the "runas" user.

#



db_parms = /var/cache/mt-daapd



#

# mp3_dir (required)

#

# Location of the mp3 files to share.  Note that because the

# files are stored in the database by inode, these must be

# in the same physical filesystem.

#



mp3_dir = /home/media/music



#

# servername (required)

#

# This is both the name of the server as advertised

# via rendezvous, and the name of the database

# exported via DAAP.  Also know as "What shows up in iTunes".

#



servername = firefly



#

# runas (required)

#

# This is the user to drop privs to if running as

# root.  If mt-daapd is not started as root, this

# configuration option is ignored.  Notice that this

# must be specified whether the server is running

# as root or not.

#

# This is also ignored on Windows.

#



runas = mt-daapd



#

# playlist (optional)

#

# This is the location of a playlist file.

# This is for Apple-style "Smart Playlists"

# See the mt-daapd.playlist file in the

# contrib directory for syntax and examples

#

# This doesn't control static playlists... these

# are controlled with the "process_m3u" directive

# below.

#



# playlist = /etc/mt-daapd.playlist



#

# password (optional)

#

# This is the password required to listen to MP3 files

# i.e. the password that iTunes prompts for

#



#password = mp3



#

# extensions (optional)

#

# These are the file extensions that the daap server will

# try to index and serve.  By default, it only indexes and

# serves .mp3 files.  It can also server .m4a and .m4p files,

# and just about any other files, really.  Unfortunately, while

# it can *attempt* to serve other files (.ogg?), iTunes won't

# play them.  Perhaps this would be useful on Linux with

# Rhythmbox, once it understands daap.  (hurry up!)

#

# Failing that, one can use server-side conversion to transcode

# non-standard (.ogg, .flac) music to wav on the server side.

# See the ssc_* options below.

#

# To be able to index .ogg files, you'll need to have configured

# with --enable-oggvorbis.  For .flac, --enable-flac, for .mpc,

# --enable-musepack.

#



extensions = .mp3,.m4a,.m4p,.ogg,.flac,.mpc



#

# ssc_codectypes (optional)

#

# List of codectypes for files that the daap server should

# perform internal format conversion and present to clients

# as WAV files.  The file extensions that these codectypes correspond

# to must also be present in 'extensions'

# configuration value, or files are not probed in the first

# place.

#

# Valid codectypes:

#

# mp4a - for AAC (.aac, .mp4, .m4a, .m4p)

# mpeg - for mp3

# wav - for wav

# wma - for wma

# ogg - for ogg

# flac - for flac (.flac, .fla)

# mpc for musepack (.mpc, .mpp, .mp+)

# alac for alac (.m4a)

#



# Not needed because ffmpeg is enabled. -joshk

# ssc_codectypes = ogg,flac,alac



#

# ssc_prog (optional)

#

# Program that is used in server side format conversion.

# Program must accept following command line syntax:

#     ssc_prog filename offset length ...

# Parameter filename is the real name of the file that is

# to be converted and streamed, offset is number of bytes

# that are skipped from the beginning of the _output_ file

# before streaming is started, length is length of the song

# in seconds (or zero).  All other possible arguments must

# be ignored.  The resulting wav file (or the rest of

# the file after initial seek) is written to the standard

# output by the ssc_prog program.  This is typically

# a script that is a front end for different conversion tools

# handling different formats.

#



# ssc_prog = /usr/bin/mt-daapd-ssc.sh



#

# logfile (optional)

#

# This is the file to log to.  If this is not configured,

# then it will log to the syslog.

#

# Not that the -d  switch will control the log verbosity.

# By default, it runs at log level 1.  Log level 9 will churn

# out scads of useless debugging information.  Values in between

# will vary the amount of logging you get.

#



#logfile = /var/log/mt-daapd.log



#

# art_filename (optional)

#

# There is experimental support thanks to Hiren Joshi

# ([email protected]) for dynamically adding art to the id3v2

# header as it is streamed (!!).  If you were using a music system

# like zina or andromeda, for example, with cover art called

# "_folderOpenImage.jpg", you could use the parameter

# art_file _folderOpenImage.jpg and if the file _folderOpenImage.jpg

# was located in the same folder as the .mp3 file, it would appear

# in iTunes.  Cool, eh?

#



#art_filename = _folderOpenImage.jpg



#

# rescan_interval

#

# How often to check the file system to see if any mp3 files

# have been added or removed.

#

# if not specified, the default is 0, which disables background scanning.

#

# If background rescanning is disabled, a scan can still be forced from the

# "status" page of the administrative web interface

#

# Setting a rescan_interval lower than the time it takes to rescan

# won't hurt anything, it will just waste CPU, and make connect times

# to the daap server longer.

#

#



#rescan_interval = 300



# always_scan

#

# The default behavior is not not do background rescans of the

# filesystem unless there are clients connected.  The thought is to

# allow the drives to spin down unless they are in use.  This might be

# of more importance in IDE drives that aren't designed to be run

# 24x7.  Forcing a scan through the web interface will always work

# though, even if no users are connected.



# always_scan = 0



#

# process_m3u

#

# By default m3u processing is turned off, since most m3u files

# sitting around in peoples mp3 directories have bad paths, and

# I hear about it.  :)

#

# If you are sure your m3u files have good paths (i.e. unixly pathed,

# with relative paths relative to the directory the m3u is in), then

# you can turn on m3u processing by setting this directive to 1.

#

# I'm not sure "unixly" is a word, but you get the idea.

#



# process_m3u = 0



#

# scan_type

#

#

# This sets how aggressively mp3 files should be scanned to detrmine

# file length.  There are three values:

#

# 0 (Normal)

#   Just scan the first mp3 frame to try and calculate size.  This will

#   be accurate for most files, but VBR files without an Xing tag will

#   probably have wildly inaccurate file times.  This is the default.

#

# 1 (Aggressive)

#   This checks the bitrates of 10 frames in the middle of the song.

#   This will still be inaccurate for VBR files without an Xing tag,

#   but they probably won't be quite as inaccurate as 0.  This takes

#   more time, obviously, although the time hit will only happen the

#   first time you scan a particular file.

#

# 2 (Painfully aggressive)

#   This walks through the entire song, counting the number of frames.

#   This should result in accurate song times, but will take the most

#   time.  Again, this will only have to be incurred the first time

#   the file is indexed.

#



scan_type = 2

logfile = /var/log/fireflylog

debuglevel = 9



#

# compress

#

# Whether to use gzip content-encoding when transferring playlists etc.

# This was contributed as a patch by Ciamac Moallemi just prior to the 0.2.1

# release, and as such, hasn't gotten as much testing as other features.

#

# This feature should substantially speed up transfers of large databases

# and playlists.

#

# It will eventually default to 1, but currently it defaults to 0.

#



#compress = 0



[plugins]

plugin_dir = /usr/lib/mt-daapd/plugins

plugins = rsp.so,ssc-ffmpeg.so

Would appreciate any help!